Updated doxygen config to version 1.8.2.

Documentation/Doxyfile.txt.in

@@ -1,4 +1,4 @@
-# Doxyfile 1.7.3
+# Doxyfile 1.8.2
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -22,8 +22,9 @@
 
 DOXYFILE_ENCODING      = UTF-8
 
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
-# by quotes) that should identify the project.
+# The PROJECT_NAME tag is a single word (or sequence of words) that should
+# identify the project. Note that if you do not use Doxywizard you need
+# to put quotes around the project name if it contains spaces.
 
 PROJECT_NAME           = @PROJECT_NAME@
 
@@ -33,7 +34,9 @@ PROJECT_NAME           = @PROJECT_NAME@
 
 PROJECT_NUMBER         = @CTK_VERSION@
 
-# Using the PROJECT_BRIEF tag one can provide an optional one line description for a project that appears at the top of each page and should give viewer a quick idea about the purpose of the project. Keep the description short.
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer
+# a quick idea about the purpose of the project. Keep the description short.
 
 PROJECT_BRIEF          = "The Common Toolkit is a community effort to provide support code for medical image analysis, surgical navigation, and related projects."
 
@@ -133,7 +136,9 @@ FULL_PATH_NAMES        = YES
 # only done if one of the specified strings matches the left-hand part of
 # the path. The tag can be used to show relative paths in the file list.
 # If left blank the directory from which doxygen is run is used as the
-# path to strip.
+# path to strip. Note that you specify absolute paths here, but also
+# relative paths, which will be relative from the directory where doxygen is
+# started.
 
 STRIP_FROM_PATH        = @CTK_SOURCE_DIR@
 
@@ -202,6 +207,13 @@ TAB_SIZE               = 2
 
 ALIASES                =
 
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding
+# "class=itcl::class" will allow you to use the command class in the
+# itcl::class meaning.
+
+TCL_SUBST              =
+
 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
 # sources only. Doxygen will then generate output that is more tailored for C.
 # For instance, some of the names that are used will be different. The list
@@ -229,17 +241,34 @@ OPTIMIZE_FOR_FORTRAN   = NO
 OPTIMIZE_OUTPUT_VHDL   = NO
 
 # Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given extension.
-# Doxygen has a built-in mapping, but you can override or extend it using this
-# tag. The format is ext=language, where ext is a file extension, and language
-# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
-# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
-# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
-# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
-# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension,
+# and language is one of the parsers supported by doxygen: IDL, Java,
+# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C,
+# C++. For instance to make doxygen treat .inc files as Fortran files (default
+# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note
+# that for custom extensions you also need to set FILE_PATTERNS otherwise the
+# files are not read by doxygen.
 
 EXTENSION_MAPPING      =
 
+# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all
+# comments according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you
+# can mix doxygen, HTML, and XML commands with Markdown formatting.
+# Disable only in case of backward compatibilities issues.
+
+MARKDOWN_SUPPORT       = YES
+
+# When enabled doxygen tries to link words that correspond to documented classes,
+# or namespaces to their corresponding documentation. Such a link can be
+# prevented in individual cases by by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+
+AUTOLINK_SUPPORT       = YES
+
 # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
 # to include (a tag file for) the STL sources as input, then you should
 # set this tag to YES in order to let doxygen match functions declarations and
@@ -260,12 +289,7 @@ CPP_CLI_SUPPORT        = NO
 
 SIP_SUPPORT            = NO
 
-# For Microsoft's IDL there are propget and propput attributes to indicate getter
-# and setter methods for a property. Setting this option to YES (the default)
-# will make doxygen replace the get and set methods by a property in the
-# documentation. This will only work if the methods are indeed getting or
-# setting a simple type. If this is not the case, or you want to show the
-# methods anyway, you should set this option to NO.
+# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO.
 
 IDL_PROPERTY_SUPPORT   = YES
 
@@ -284,6 +308,22 @@ DISTRIBUTE_GROUP_DOC   = NO
 
 SUBGROUPING            = YES
 
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and
+# unions are shown inside the group in which they are included (e.g. using
+# @ingroup) instead of on a separate page (for HTML and Man pages) or
+# section (for LaTeX and RTF).
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
+# unions with only public data fields will be shown inline in the documentation
+# of the scope in which they are defined (i.e. file, namespace, or group
+# documentation), provided this scope is documented. If set to NO (the default),
+# structs, classes, and unions are shown on a separate page (for HTML and Man
+# pages) or section (for LaTeX and RTF).
+
+INLINE_SIMPLE_STRUCTS  = NO
+
 # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
 # is documented as struct, union, or enum with the name of the typedef. So
 # typedef struct TypeS {} TypeT, will appear in the documentation as a struct
@@ -306,10 +346,21 @@ TYPEDEF_HIDES_STRUCT   = NO
 # a logarithmic scale so increasing the size by one will roughly double the
 # memory usage. The cache size is given by this formula:
 # 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
-# corresponding to a cache size of 2^16 = 65536 symbols
+# corresponding to a cache size of 2^16 = 65536 symbols.
 
 SYMBOL_CACHE_SIZE      = 0
 
+# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be
+# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given
+# their name and scope. Since this can be an expensive process and often the
+# same symbol appear multiple times in the code, doxygen keeps a cache of
+# pre-resolved symbols. If the cache is too small doxygen will become slower.
+# If the cache is too large, memory is wasted. The cache size is given by this
+# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols.
+
+LOOKUP_CACHE_SIZE      = 0
+
 #---------------------------------------------------------------------------
 # Build related configuration options
 #---------------------------------------------------------------------------
@@ -326,6 +377,11 @@ EXTRACT_ALL            = YES
 
 EXTRACT_PRIVATE        = @CTK_USER_DOCUMENTATION@
 
+# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
+# scope will be included in the documentation.
+
+EXTRACT_PACKAGE        = NO
+
 # If the EXTRACT_STATIC tag is set to YES all static members of a file
 # will be included in the documentation.
 
@@ -459,8 +515,11 @@ SORT_GROUP_NAMES       = NO
 
 SORT_BY_SCOPE_NAME     = NO
 
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper type resolution of all parameters of a function it will reject a
-# match between the prototype and the implementation of a member function even if there is only one candidate or it is obvious which candidate to choose by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to
+# do proper type resolution of all parameters of a function it will reject a
+# match between the prototype and the implementation of a member function even
+# if there is only one candidate or it is obvious which candidate to choose
+# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
 # will still accept a match between prototype and implementation in such cases.
 
 STRICT_PROTO_MATCHING  = NO
@@ -510,12 +569,6 @@ MAX_INITIALIZER_LINES  = 30
 
 SHOW_USED_FILES        = YES
 
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES       = YES
-
 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
 # This will remove the Files entry from the Quick Index and from the
 # Folder Tree View (if specified). The default is YES.
@@ -541,13 +594,23 @@ FILE_VERSION_FILTER    =
 
 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
 # by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. The create the layout file
+# output files in an output format independent way. To create the layout file
 # that represents doxygen's defaults, run doxygen with the -l option.
 # You can optionally specify a file name after the option, if omitted
 # DoxygenLayout.xml will be used as the name of the layout file.
 
 LAYOUT_FILE            =
 
+# The CITE_BIB_FILES tag can be used to specify one or more bib files
+# containing the references data. This must be a list of .bib files. The
+# .bib extension is automatically appended if omitted. Using this command
+# requires the bibtex tool to be installed. See also
+# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style
+# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this
+# feature you need bibtex and perl available in the search path.
+
+CITE_BIB_FILES         =
+
 #---------------------------------------------------------------------------
 # configuration options related to warning and progress messages
 #---------------------------------------------------------------------------
@@ -670,6 +733,7 @@ FILE_PATTERNS          = @CTK_ADDITIONAL_FILE_PATTERN@ \
                          *.patch \
                          *.xpm \
                          *.dox \
+                         *.md \
                          */CMake/*.cmake
 
 # The RECURSIVE tag can be used to turn specify whether or not subdirectories
@@ -678,9 +742,11 @@ FILE_PATTERNS          = @CTK_ADDITIONAL_FILE_PATTERN@ \
 
 RECURSIVE              = YES
 
-# The EXCLUDE tag can be used to specify files and/or directories that should
+# The EXCLUDE tag can be used to specify files and/or directories that should be
 # excluded from the INPUT source files. This way you can easily exclude a
 # subdirectory from a directory tree whose root is specified with the INPUT tag.
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
 
 EXCLUDE                = @CTK_BINARY_DIR@ \
                          @CTK_SOURCE_DIR@/Utilities \
@@ -688,7 +754,7 @@ EXCLUDE                = @CTK_BINARY_DIR@ \
                          @CTK_SOURCE_DIR@/CMake/ctkDashboardScript.TEMPLATE.cmake \
                          @CTK_SOURCE_DIR@/Libs/Visualization/XIP
 
-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
 # directories that are symbolic links (a Unix file system feature) are excluded
 # from the input.
 
@@ -721,7 +787,8 @@ EXCLUDE_SYMBOLS        =
 # directories that contain example code fragments that are included (see
 # the \include command).
 
-EXAMPLE_PATH           = @CTK_SOURCE_DIR@/Libs/Core/Documentation/Snippets/ \
+EXAMPLE_PATH           = @CTK_SOURCE_DIR@/Libs/CommandLineModules/Documentation/Snippets/ \
+                         @CTK_SOURCE_DIR@/Libs/Core/Documentation/Snippets/ \
                          @CTK_SOURCE_DIR@/Libs/PluginFramework/Documentation/Snippets/
 
 # If the value of the EXAMPLE_PATH tag contains directories, you can use the
@@ -798,7 +865,7 @@ INLINE_SOURCES         = NO
 
 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
 # doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
+# fragments. Normal C, C++ and Fortran comments will always remain visible.
 
 STRIP_CODE_COMMENTS    = YES
 
@@ -882,7 +949,14 @@ HTML_FILE_EXTENSION    = .html
 
 # The HTML_HEADER tag can be used to specify a personal HTML header for
 # each generated HTML page. If it is left blank doxygen will generate a
-# standard header.
+# standard header. Note that when using a custom header you are responsible
+#  for the proper inclusion of any scripts and style sheets that doxygen
+# needs, which is dependent on the configuration options used.
+# It is advised to generate a default header using "doxygen -w html
+# header.html footer.html stylesheet.css YourConfigFile" and then modify
+# that header. Note that the header is subject to change so you typically
+# have to redo this when upgrading to a newer version of doxygen or when
+# changing the value of configuration settings such as GENERATE_TREEVIEW!
 
 HTML_HEADER            =
 
@@ -894,15 +968,34 @@ HTML_FOOTER            =
 
 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
 # style sheet that is used by each HTML page. It can be used to
-# fine-tune the look of the HTML output. If the tag is left blank doxygen
-# will generate a default style sheet. Note that doxygen will try to copy
-# the style sheet file to the HTML output directory, so don't put your own
-# stylesheet in the HTML output directory as well, or it will be erased!
+# fine-tune the look of the HTML output. If left blank doxygen will
+# generate a default style sheet. Note that it is recommended to use
+# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this
+# tag will in the future become obsolete.
 
 HTML_STYLESHEET        =
 
+# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional
+# user-defined cascading style sheet that is included after the standard
+# style sheets created by doxygen. Using this option one can overrule
+# certain style aspects. This is preferred over using HTML_STYLESHEET
+# since it does not replace the standard style sheet and is therefor more
+# robust against future updates. Doxygen will copy the style sheet file to
+# the output directory.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that
+# the files will be copied as-is; there are no commands or markers available.
+
+HTML_EXTRA_FILES       =
+
 # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
-# Doxygen will adjust the colors in the stylesheet and background images
+# Doxygen will adjust the colors in the style sheet and background images
 # according to this color. Hue is specified as an angle on a colorwheel,
 # see http://en.wikipedia.org/wiki/Hue for more information.
 # For instance the value 0 represents red, 60 is yellow, 120 is green,
@@ -932,20 +1025,23 @@ HTML_COLORSTYLE_GAMMA  = 80
 
 HTML_TIMESTAMP         = YES
 
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS     = YES
-
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+# page has loaded.
 
 HTML_DYNAMIC_SECTIONS  = NO
 
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
 # If the GENERATE_DOCSET tag is set to YES, additional index files
 # will be generated that can be used as input for Apple's Xcode 3
 # integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -973,9 +1069,9 @@ DOCSET_FEEDNAME        = "Doxygen generated docs"
 
 DOCSET_BUNDLE_ID       = org.doxygen.Project
 
-# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely
+# identify the documentation publisher. This should be a reverse domain-name
+# style string, e.g. com.mycompany.MyDocSet.documentation.
 
 DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
 
@@ -1097,18 +1193,14 @@ GENERATE_ECLIPSEHELP   = NO
 
 ECLIPSE_DOC_ID         = org.doxygen.Project
 
-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
-# top of each HTML page. The value NO (the default) enables the index and
-# the value YES disables it.
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs)
+# at top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it. Since the tabs have the same information as the
+# navigation tree you can set this option to NO if you already set
+# GENERATE_TREEVIEW to YES.
 
 DISABLE_INDEX          = NO
 
-# This tag can be used to set the number of enum values (range [0,1..20])
-# that doxygen will group on one line in the generated HTML documentation.
-# Note that a value of 0 will completely suppress the enum values from appearing in the overview section.
-
-ENUM_VALUES_PER_LINE   = 4
-
 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
 # structure should be generated to display hierarchical information.
 # If the tag value is set to YES, a side panel will be generated
@@ -1116,13 +1208,17 @@ ENUM_VALUES_PER_LINE   = 4
 # is generated for HTML Help). For this to work a browser that supports
 # JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
 # Windows users are probably better off using the HTML help feature.
+# Since the tree basically has the same information as the tab index you
+# could consider to set DISABLE_INDEX to NO when enabling this option.
 
 GENERATE_TREEVIEW      = NONE
 
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
+# (range [0,1..20]) that doxygen will group on one line in the generated HTML
+# documentation. Note that a value of 0 will completely suppress the enum
+# values from appearing in the overview section.
 
-USE_INLINE_TREES       = NO
+ENUM_VALUES_PER_LINE   = 4
 
 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
 # used to set the initial width (in pixels) of the frame in which the tree
@@ -1155,7 +1251,7 @@ FORMULA_TRANSPARENT    = YES
 # (see http://www.mathjax.org) which uses client side Javascript for the
 # rendering instead of using prerendered bitmaps. Use this if you do not
 # have LaTeX installed or if you want to formulas look prettier in the HTML
-# output. When enabled you also need to install MathJax separately and
+# output. When enabled you may also need to install MathJax separately and
 # configure the path to it using the MATHJAX_RELPATH option.
 
 USE_MATHJAX            = NO
@@ -1164,12 +1260,19 @@ USE_MATHJAX            = NO
 # HTML output directory using the MATHJAX_RELPATH option. The destination
 # directory should contain the MathJax.js script. For instance, if the mathjax
 # directory is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the mathjax.org site, so you can quickly see the result without installing
-# MathJax, but it is strongly recommended to install a local copy of MathJax
-# before deployment.
+# MATHJAX_RELPATH should be ../mathjax. The default value points to
+# the MathJax Content Delivery Network so you can quickly see the result without
+# installing MathJax.
+# However, it is strongly recommended to install a local
+# copy of MathJax from http://www.mathjax.org before deployment.
 
 MATHJAX_RELPATH        = http://www.mathjax.org/mathjax
 
+# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension
+# names that should be enabled during MathJax rendering.
+
+MATHJAX_EXTENSIONS     =
+
 # When the SEARCHENGINE tag is enabled doxygen will generate a search box
 # for the HTML output. The underlying search engine uses javascript
 # and DHTML and should work on any modern browser. Note that when using
@@ -1243,6 +1346,13 @@ EXTRA_PACKAGES         =
 
 LATEX_HEADER           =
 
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
+# the generated latex document. The footer should contain everything after
+# the last chapter. If it is left blank doxygen will generate a
+# standard footer. Notice: only use this tag if you know what you are doing!
+
+LATEX_FOOTER           =
+
 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
 # is prepared for conversion to pdf (using ps2pdf). The pdf file will
 # contain links (just like the HTML output) instead of page references
@@ -1276,6 +1386,12 @@ LATEX_HIDE_INDICES     = NO
 
 LATEX_SOURCE_CODE      = NO
 
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See
+# http://en.wikipedia.org/wiki/BibTeX for more info.
+
+LATEX_BIB_STYLE        = plain
+
 #---------------------------------------------------------------------------
 # configuration options related to the RTF output
 #---------------------------------------------------------------------------
@@ -1307,7 +1423,7 @@ COMPACT_RTF            = NO
 
 RTF_HYPERLINKS         = NO
 
-# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# Load style sheet definitions from file. Syntax is similar to doxygen's
 # config file, i.e. a series of assignments. You only have to provide
 # replacements, missing definitions are set to their default value.
 
@@ -1452,7 +1568,7 @@ MACRO_EXPANSION        = NO
 EXPAND_ONLY_PREDEF     = NO
 
 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
-# in the INCLUDE_PATH (see below) will be search if a #include is found.
+# pointed to by INCLUDE_PATH will be searched when a #include is found.
 
 SEARCH_INCLUDES        = YES
 
@@ -1482,7 +1598,8 @@ PREDEFINED             = DOXYGEN_SHOULD_SKIP_THIS
 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
 # this tag can be used to specify a list of macro names that should be expanded.
 # The macro definition that is found in the sources will be used.
-# Use the PREDEFINED tag if you want to use a different macro definition that overrules the definition found in the source code.
+# Use the PREDEFINED tag if you want to use a different macro definition that
+# overrules the definition found in the source code.
 
 EXPAND_AS_DEFINED      =
 
@@ -1497,22 +1614,18 @@ SKIP_FUNCTION_MACROS   = YES
 # Configuration::additions related to external references
 #---------------------------------------------------------------------------
 
-# The TAGFILES option can be used to specify one or more tagfiles.
-# Optionally an initial location of the external documentation
-# can be added for each tagfile. The format of a tag file without
-# this location is as follows:
+# The TAGFILES option can be used to specify one or more tagfiles. For each
+# tag file the location of the external documentation should be added. The
+# format of a tag file without this location is as follows:
 #
 # TAGFILES = file1 file2 ...
 # Adding location for the tag files is done as follows:
 #
 # TAGFILES = file1=loc1 "file2 = loc2" ...
-# where "loc1" and "loc2" can be relative or absolute paths or
-# URLs. If a location is present for each tag, the installdox tool
-# does not have to be run to correct the links.
-# Note that each tag file must have a unique name
-# (where the name does NOT include the path)
-# If a tag file is not located in the directory in which doxygen
-# is run, you must also specify the path to the tagfile here.
+# where "loc1" and "loc2" can be relative or absolute paths
+# or URLs. Note that each tag file must have a unique name (where the name does
+# NOT include the path). If a tag file is not located in the directory in which
+# doxygen is run, you must also specify the path to the tagfile here.
 
 TAGFILES               =
 
@@ -1578,17 +1691,14 @@ HAVE_DOT               = YES
 # explicitly to a value larger than 0 to get control over the balance
 # between CPU load and processing speed.
 
-# Note: Specify 1 to avoid crash with doxygen 1.7.3
+DOT_NUM_THREADS        = 1
 
-DOT_NUM_THREADS        = 1 
-
-# By default doxygen will write a font called Helvetica to the output
-# directory and reference it in all dot files that doxygen generates.
-# When you want a differently looking font you can specify the font name
-# using DOT_FONTNAME. You need to make sure dot is able to find the font,
-# which can be done by putting it in a standard location or by setting the
-# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
-# containing the font.
+# By default doxygen will use the Helvetica font for all dot files that
+# doxygen generates. When you want a differently looking font you can specify
+# the font name using DOT_FONTNAME. You need to make sure dot is able to find
+# the font, which can be done by putting it in a standard location or by setting
+# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
+# directory containing the font.
 
 DOT_FONTNAME           = FreeSans
 
@@ -1597,17 +1707,16 @@ DOT_FONTNAME           = FreeSans
 
 DOT_FONTSIZE           = 10
 
-# By default doxygen will tell dot to use the output directory to look for the
-# FreeSans.ttf font (which doxygen will put there itself). If you specify a
-# different font using DOT_FONTNAME you can set the path where dot
-# can find it using this tag.
+# By default doxygen will tell dot to use the Helvetica font.
+# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to
+# set the path where dot can find it.
 
 DOT_FONTPATH           =
 
 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
 # will generate a graph for each documented class showing the direct and
 # indirect inheritance relations. Setting this tag to YES will force the
-# the CLASS_DIAGRAMS tag to NO.
+# CLASS_DIAGRAMS tag to NO.
 
 CLASS_GRAPH            = YES
 
@@ -1629,6 +1738,15 @@ GROUP_GRAPHS           = YES
 
 UML_LOOK               = NO
 
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside
+# the class node. If there are many fields or methods and many nodes the
+# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS
+# threshold limits the number of items for each type to make the size more
+# managable. Set this to 0 for no limit. Note that the threshold may be
+# exceeded by 50% before the limit is enforced.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
 # If set to YES, the inheritance and collaboration graphs will show the
 # relations between templates and their instances.
 
@@ -1669,7 +1787,7 @@ CALLER_GRAPH           = NO
 
 GRAPHICAL_HIERARCHY    = YES
 
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
 # then doxygen will show the dependencies a directory has on other directories
 # in a graphical way. The dependency relations are determined by the #include
 # relations between the files in the directories.
@@ -1677,11 +1795,22 @@ GRAPHICAL_HIERARCHY    = YES
 DIRECTORY_GRAPH        = YES
 
 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot. Possible values are png, svg, gif or svg.
-# If left blank png will be used.
+# generated by dot. Possible values are svg, png, jpg, or gif.
+# If left blank png will be used. If you choose svg you need to set
+# HTML_FILE_EXTENSION to xhtml in order to make the SVG files
+# visible in IE 9+ (other browsers do not have this requirement).
 
 DOT_IMAGE_FORMAT       = png
 
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+# Note that this requires a modern browser other than Internet Explorer.
+# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you
+# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files
+# visible. Older versions of IE do not have SVG support.
+
+INTERACTIVE_SVG        = NO
+
 # The tag DOT_PATH can be used to specify the path where the dot tool can be
 # found. If left blank, it is assumed the dot tool can be found in the path.