CTK/Plugins/org.commontk.dah.cmdlinemoduleapp/ctkCommandLineModuleAppLogic.cpp

/*=============================================================================

  Library: CTK

  Copyright (c) German Cancer Research Center,
    Division of Medical and Biological Informatics

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

=============================================================================*/

// Qt includes
#include <QtPlugin>
#include <QRect>
#include <QDebug>
#include <QPushButton>
#include <QApplication>
#include <QLabel>
#include <QRect>
#include <QStringList>
#include <QDir>
#include <QTemporaryFile>
#include <QPainter>

// CTK includes
#include "ctkDICOMImage.h"
#include "ctkCommandLineModuleAppLogic_p.h"
#include "ctkCommandLineModuleAppPlugin_p.h"
#include "ctkDicomAvailableDataHelper.h"
#include "ctkCmdLineModuleFrontendQtGui.h"
#include "ctkCmdLineModuleReference.h"
#include "ctkCmdLineModuleFuture.h"
#include "ctkCmdLineModuleBackendLocalProcess.h"

// DCMTK includes
#include <dcmtk/dcmimgle/dcmimage.h>

#if (QT_VERSION < QT_VERSION_CHECK(5,0,0))
#include <QDesktopServices>
#else
#include <QStandardPaths>
#endif

//----------------------------------------------------------------------------
ctkCommandLineModuleAppLogic::ctkCommandLineModuleAppLogic(const QString & modulelocation)
  : ctkDicomAbstractApp(ctkCommandLineModuleAppPlugin::getPluginContext()),
    AppWidget(0),
    ModuleLocation(modulelocation),
    #if (QT_VERSION < QT_VERSION_CHECK(5,0,0))
    ModuleManager(ctkCmdLineModuleManager::WEAK_VALIDATION, QDesktopServices::storageLocation(QDesktopServices::CacheLocation)),
    #else
    ModuleManager(ctkCmdLineModuleManager::WEAK_VALIDATION, QStandardPaths::writableLocation(QStandardPaths::CacheLocation)),
    #endif
    ModuleFrontend(0)
{
  connect(this, SIGNAL(startProgress()), this, SLOT(onStartProgress()), Qt::QueuedConnection);
  connect(this, SIGNAL(resumeProgress()), this, SLOT(onResumeProgress()), Qt::QueuedConnection);
  connect(this, SIGNAL(suspendProgress()), this, SLOT(onSuspendProgress()), Qt::QueuedConnection);
  connect(this, SIGNAL(cancelProgress()), this, SLOT(onCancelProgress()), Qt::QueuedConnection);
  connect(this, SIGNAL(exitHostedApp()), this, SLOT(onExitHostedApp()), Qt::QueuedConnection);
  connect(this, SIGNAL(dataAvailable()), this, SLOT(onDataAvailable()));

  ModuleManager.registerBackend(new ctkCmdLineModuleBackendLocalProcess);
  //notify Host we are ready.
  try {
    getHostInterface()->notifyStateChanged(ctkDicomAppHosting::IDLE);
  }
  catch(...)
  {
    qDebug() << "ctkDicomAbstractApp: Could not getHostInterface()";
  }
}

//----------------------------------------------------------------------------
ctkCommandLineModuleAppLogic::~ctkCommandLineModuleAppLogic()
{
  ctkPluginContext* context = ctkCommandLineModuleAppPlugin::getPluginContext();
  QList <QSharedPointer<ctkPlugin> > plugins = context->getPlugins();
  for (int i = 0; i < plugins.size(); ++i)
  {
    qDebug() << plugins.at(i)->getSymbolicName ();
  }
}

//----------------------------------------------------------------------------
bool ctkCommandLineModuleAppLogic::bringToFront(const QRect& requestedScreenArea)
{
  if(this->AppWidget!=NULL)
  {
    this->AppWidget->move(requestedScreenArea.topLeft());
    this->AppWidget->resize(requestedScreenArea.size());
    this->AppWidget->activateWindow();
    this->AppWidget->raise();
  }
  return true;
}

//----------------------------------------------------------------------------
void ctkCommandLineModuleAppLogic::do_something()
{
  AppWidget = new QWidget;
  ui.setupUi(AppWidget);

  QVBoxLayout *verticalLayout = new QVBoxLayout(ui.PlaceHolder);
  verticalLayout->setObjectName(QString::fromUtf8("cmdlineparentverticalLayout"));

  ui.CLModuleName->setText(ModuleLocation);

  ctkCmdLineModuleReference moduleRef = ModuleManager.registerModule(ModuleLocation);

  ModuleFrontend = new ctkCmdLineModuleFrontendQtGui(moduleRef);

  QObject* guiHandle = ModuleFrontend->guiHandle();
  QWidget* widget = qobject_cast<QWidget*>(guiHandle);
  widget->setParent(ui.PlaceHolder);
  verticalLayout->addWidget(widget);

  connect(ui.LoadDataButton, SIGNAL(clicked()), this, SLOT(onLoadDataClicked()));
  connect(ui.CreateSecondaryCaptureButton, SIGNAL(clicked()), this, SLOT(onCreateSecondaryCapture()));
  try
    {
    QRect preferred(50,50,100,100);
    qDebug() << "  Asking:getAvailableScreen";
    QRect rect = getHostInterface()->getAvailableScreen(preferred);
    qDebug() << "  got sth:" << rect.top();
    this->AppWidget->move(rect.topLeft());
    this->AppWidget->resize(rect.size());
    }
  catch (const ctkRuntimeException& e)
    {
    qCritical() << e.what();
    return;
    }
  this->AppWidget->show();
}

//----------------------------------------------------------------------------
void ctkCommandLineModuleAppLogic::onStartProgress()
{
  setInternalState(ctkDicomAppHosting::INPROGRESS);

  // we need to create the button before we receive data from
  // the host, which happens immediately after calling
  // getHostInterface()->notifyStateChanged
  do_something();

  getHostInterface()->notifyStateChanged(ctkDicomAppHosting::INPROGRESS);
}

//----------------------------------------------------------------------------
void ctkCommandLineModuleAppLogic::onResumeProgress()
{
  //reclame all resources.

  //notify state changed
  setInternalState(ctkDicomAppHosting::INPROGRESS);
  getHostInterface()->notifyStateChanged(ctkDicomAppHosting::INPROGRESS);
  //we're rolling
  //do something else normally, but this is an example
  ui.LoadDataButton->setEnabled(true);
}

//----------------------------------------------------------------------------
void ctkCommandLineModuleAppLogic::onSuspendProgress()
{
  //release resources it can reclame later to resume work
  ui.LoadDataButton->setEnabled(false);
  //notify state changed
  setInternalState(ctkDicomAppHosting::SUSPENDED);
  getHostInterface()->notifyStateChanged(ctkDicomAppHosting::SUSPENDED);
  //we're rolling
  //do something else normally, but this is an example
}

//----------------------------------------------------------------------------
void ctkCommandLineModuleAppLogic::onCancelProgress()
{
  //release all resources
  onReleaseResources();
  //update state
  setInternalState(ctkDicomAppHosting::IDLE);
  getHostInterface()->notifyStateChanged(ctkDicomAppHosting::IDLE);
}

//----------------------------------------------------------------------------
void ctkCommandLineModuleAppLogic::onExitHostedApp()
{
  //useless move, but correct:
  setInternalState(ctkDicomAppHosting::EXIT);
  getHostInterface()->notifyStateChanged(ctkDicomAppHosting::EXIT);
  qDebug() << "Exiting";
  //die
  qApp->exit(0);
}

//----------------------------------------------------------------------------
void ctkCommandLineModuleAppLogic::onReleaseResources()
{
  this->AppWidget->hide();
  delete (this->AppWidget);
  this->AppWidget = 0 ;
}


//----------------------------------------------------------------------------
void ctkCommandLineModuleAppLogic::onDataAvailable()
{
  QString s;
  const ctkDicomAppHosting::AvailableData& data = getIncomingAvailableData();
  if(this->AppWidget == 0)
    {
    qCritical() << "Button is null!";
    return;
    }
  s = "Received notifyDataAvailable with patients.count()= " + QString().setNum(data.patients.count());
  if(data.patients.count()>0)
    {
    s=s+" name:"+data.patients.begin()->name+" studies.count(): "+QString().setNum(data.patients.begin()->studies.count());
    if(data.patients.begin()->studies.count()>0)
    {
      s=s+" series.count():" + QString().setNum(data.patients.begin()->studies.begin()->series.count());
      if(data.patients.begin()->studies.begin()->series.count()>0)
      {
        s=s+" uid:" + data.patients.begin()->studies.begin()->series.begin()->seriesUID;
//        QUuid uuid("93097dc1-caf9-43a3-a814-51a57f8d861d");//data.patients.begin()->studies.begin()->series.begin()->seriesUID);
        QUuid uuid = data.patients.begin()->studies.begin()->series.begin()->objectDescriptors.begin()->descriptorUUID;
        s=s+" uuid:"+uuid.toString();
      }
    }
  }
  ui.ReceivedDataInformation->setText(s);
  ui.LoadDataButton->setEnabled(true);

  //FIX: still does not work here: need to postpone onDataAvailable even further (not just via QueuedConnection)
  QStringList preferredProtocols;
  preferredProtocols.append("file:");
  OutputLocation = getHostInterface()->getOutputLocation(preferredProtocols);
}


void ctkCommandLineModuleAppLogic::onLoadDataClicked()
{
  const ctkDicomAppHosting::AvailableData& data = getIncomingAvailableData();
  if(data.patients.count()==0)
    return;
  const ctkDicomAppHosting::Patient& firstpatient = *data.patients.begin();
  QList<QUuid> uuidlist = ctkDicomAvailableDataHelper::getAllUuids(firstpatient);

  QString transfersyntax("1.2.840.10008.1.2.1");
  QList<QString> transfersyntaxlist;
  transfersyntaxlist.append(transfersyntax);
  QList<ctkDicomAppHosting::ObjectLocator> locators;
  locators = getHostInterface()->getData(uuidlist, transfersyntaxlist, false);
  qDebug() << "got locators! " << QString().setNum(locators.count());

  QString s;
  s=s+" loc.count:"+QString().setNum(locators.count());
  if(locators.count()>0)
  {
    s=s+" URI: "+locators.begin()->URI +" locatorUUID: "+locators.begin()->locator+" sourceUUID: "+locators.begin()->source;
    qDebug() << "URI: " << locators.begin()->URI;
    QString filename = locators.begin()->URI;
    if(filename.startsWith("file:/",Qt::CaseInsensitive))
      filename=filename.remove(0,8);
    qDebug()<<filename;
    if(QFileInfo(filename).exists())
    {
      try {
        DicomImage dcmtkImage(filename.toLatin1().data());
        ctkDICOMImage ctkImage(&dcmtkImage);

        QPixmap pixmap = QPixmap::fromImage(ctkImage.frame(0),Qt::AvoidDither);
        if (pixmap.isNull())
        {
          qCritical() << "Failed to convert QImage to QPixmap" ;
        }
        else
        {
          ui.PlaceHolderForImage->setPixmap(pixmap);
        }
      }
      catch(...)
      {
        qCritical() << "Caught exception while trying to load file" << filename;
      }
    }
    else
    {
      qCritical() << "File does not exist: " << filename;
    }
  }
  ui.ReceivedDataInformation->setText(s);
}

void ctkCommandLineModuleAppLogic::onCreateSecondaryCapture()
{
  const QPixmap* pixmap = ui.PlaceHolderForImage->pixmap();
  if(pixmap!=NULL)
  {
    QString templatefilename = QDir(OutputLocation).absolutePath();
    if(templatefilename.isEmpty()==false) templatefilename.append('/');
    templatefilename.append("ctkdahscXXXXXX.jpg");
    QString inputFileName, outputFileName;
    {
      QTemporaryFile inputtmp(templatefilename,this->AppWidget);
      if(!inputtmp.open())
        return;
      inputFileName = inputtmp.fileName();
      inputtmp.close();

      QTemporaryFile outputtmp(templatefilename,this->AppWidget);
      if(!outputtmp.open())
        return;
      outputFileName = outputtmp.fileName();
      outputtmp.close();
    }

    pixmap->save(inputFileName);

    ModuleFrontend->setValue("fileVar", inputFileName);
    ModuleFrontend->setValue("dirVar", outputFileName);
    ModuleManager.run(ModuleFrontend);

    QPixmap resultpix(outputFileName);
    ui.PlaceHolderForResult->setPixmap(resultpix);

    //if(tempfile->open())
    //{
    //  QString filename = QFileInfo(tempfile->fileName()).absoluteFilePath();
    //  qDebug() << "Created file: " << filename;
    //  tempfile->close();
    //else
    //  qDebug() << "Creating temporary file failed.";
    //}
    qDebug() << "Created Uuid: " << getHostInterface()->generateUID();

    ctkDicomAppHosting::AvailableData resultData;
    ctkDicomAvailableDataHelper::addToAvailableData(resultData,
      objectLocatorCache(),
      outputFileName);

    bool success = publishData(resultData, true);
    if(!success)
    {
      qCritical() << "Failed to publish data";
    }
    qDebug() << "  publishData returned: " << success;
  }
}